Maretron Direct Current DC Monitor Online Sale

Maretron s DCM100 DC Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load.

Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit.

When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery Temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don t have to break connections or install connectors as you do with inline shunts used by other solutions.

Best of all, the DCM100 is NMEA 2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron s N2KView vessel monitoring and control system. Battery Voltage Battery Current Ripple Voltage Battery Case Temperature State of Charge Time Remaining Charge Efficiency Factor.

* DCM100 requires configuration. (Maretron DSM250, DSM410, USB100, or IPG100 needed to configure)

Maretron DCM10001 Attributes

Maretron s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panelts, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, changing current, and terminal voltage to precisely compute battery state of charge, state of health, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don t have to break connections or install connectors as you do with inline shunts used by other solutions. Best of all, the DCM100 is NMEA2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron s N2KView vessel monitoring and control system.
• Battery Voltage
• Battery Current
• Ripple Voltage
• Battery Case Temperature
• State of Charge
• Time Remaining
• Charge Efficiency Factor

  Dcm100-nmea 2000 DC monitor maretron s dcm100 DC monitor is an advanced electronic monitoring device used to measure the voltage and current of any DC power supply or load. Examples of DC power sources that can be monitored using dcm100 include batteries, alternators, solar panels, and wind turbines. dcm100 can also be used to monitor DC loads, such as inverters, windlasses, DC chillers or any DC branch circuit. When using dcm100 to monitor the battery, complex circuits and software algorithms will monitor the battery temperature, load current, charging current and terminal voltage to accurately calculate the battery s charging status, health status and remaining time. To measure current, dcm100 uses the most advanced Hall-effect current sensor that comes with it. The sensor only needs to slide on the wire without disconnecting or installing connectors such as series shunts used in other solutions. . Most importantly, dcm100 has passed nmea 2000 certification, so you can use a compatible nmea 2000 monitor to view all DC information anywhere on the container. dcm100 is a key component of maretron s n2kview container monitoring system.

  Includes:

  • Two (2) FC01 cables.
  • One (1) LEMHTA200-S 200 amp Current Transducer.
  • One (1) TR3K Ring Under Bolt Temperature Probe.

  • Transmits:

    • Battery Voltage
    • Battery Current
    • Ripple Voltage
    • Battery Case Temperature
    • State of Charge
    • Time Remaining
    • Charge Efficiency Factor

    • Electrical:

      • Battery Sense Voltage Range: 0 to 50 VDC 
      • Battery Sense Voltage Accuracy: ±100 mV B
      • Battery Current Range: 0 to 200A (With included Hall-effect current sensor) 
      • Battery Current Accuracy: ±1% (With included Hall-effect current sensor)
      • Operating Voltage: 9 to 16 Volts Battery Interface (NMEA Interface 9 to 32 Volts) 
      • Power Consumption (Battery Interface): 70mA 
      • Power Consumption (NMEA 2000 Connection): 50mA 
      • Load Equivalence Number: (LEN) 1 (NMEA 2000 Spec. [1 LEN = 50mA]) 
      • Reverse Battery Protection: Yes (Indefinitely) 
      • Load Dump Protection Yes (Energy Rated Per SAE J1113)

      • !!!!—-
        PRODUCT ID: 33344
        SKU: NVN-33344
        CSKU: CWR-33344
        REWRITE: 44455-maretron-direct-current-dc-monitor
        MPN: DCM100-01
        UPC: 873804000183
        ASIN: B001CI6JTK
        WSKU: MARDCM10001
        SSKU: MRTN-DCM100-01
        KSKU: MRTDCM10001
        GSKU: DCM100-01
        MSKU:
        LSKU:
        NAME: Maretron Direct Current DC Monitor
        NAME_EX: MARETRON DIRECT CURRENT (DC) MONITOR
        PTITLE: Maretron Direct Current DC Monitor
        TYPE: Marine Navigation & Instruments | NMEA Cables & Sensors
        VENDOR: Maretron
        Google Category: ELECTRONICS > MARINE ELECTRONICS > MARINE CHARTPLOTTERS & GPS
        Amazon Category: Automotive Parts and Accessories
        Amazon Title: DC Power Monitor, NMEA 2000
        Google Title: Maretron Direct Current DC Monitor
        Amazon Category: Automotive Parts and Accessories
        Gtags:

        Voltmeter

        
        GSpecs:

        Title	Default Title